Unique Solutions Mold -

Unique Solutions Mold

Showing 21 - 30 of 60, total 6 pages [First] [Previous] [Next] [Last]

insert mold parts
Specification: 25 sets/ per month
Detail: Co***ring the metal inserts gap which is east to pass vibration testing and reliability is higher, due to the combination between liquid plastic and metal inserts

insert mold
Specification: 25 sets/ per month
Detail: Metal insert moulding is injected with plastic part processing, the insert can be plastic or metal, normally it will be metal parts or thread parts, they must be in a fixed area before injection, so it will be fitting very wel...

gas & water assisted injection mold
Specification: 25 sets/ per month
Detail: Pushing the liquid plastic into the cavity and core side by high pressure during the injection process, and the gas pressure is maintained to form a hollow section inside the thick wall of the plastic part, the injection proce...

cold runner & hot runner plastic mold
Specification: see description
Detail: Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner mould...

automotive window frame mould
Specification: see description
Detail: Car Window Mould has many advantages including: 1. Reducing the modification times and shortening the development cycle; 2. Improving product quality, solving the product size issue until meeting the drawing requirement...

automotive water intake manifold mould
Specification: see description
Detail: Automotive Water Inlet Manifold Mould Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantag...

automotive mold
Specification: see description
Detail: Large drop of automotive mold top and bottom; The automotive mold technology is complicated; The injection system is many and complicated; The mold cost is ver high. AUTOMOTIVE MOLD TYPES Automotive AC Air Outlet The ai...

auto parts mould
Specification: see description
Detail: Automotive Parts Mold Molded automotive parts features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimbl...

plastic pipe mold
Specification: see description
Detail: Plastic Pipe Mold The gas-assisted controller is used to control the pressure of nitrogen to the pipe fitting mould at different times, the controller is divided into a single air circuit, double air circuit, and four air c...

drip tip mold
Specification: see description
Detail: 2k Electronic Cigarette Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable for large-volume products; 3. Good product consistency and low defect r...


Showing 21 - 30 of 60, total 6 pages [First] [Previous] [Next] [Last]
1 2 3 4 5 6